3.5” CCTV Security Camera Tester With Digital Multimeter (CT2603)

Product Detail

3.5” CCTV Security Camera Tester With Digital multimeter

Description:
3.5 inch TFT-LCD, LCD Brightness/Contrast/Color Saturation are adjustable, NTSC/PAL auto display, Video signal testing, Video signal level test,  NTSC/PAL Enhanced Color bar generator, PTZ controller, UTP cable tester, PTZ data analyst, PTZ address scanning, DC12V 1A power output for camera, Audio testing, POE power supply testing, PING testing, IP address scan, Video snapshot, Video record, Image magnification, Port flicker, LED lamp, Cable scan function, Lithium Ion Polymer Battery support 11 hours working time. support more than 30 IP camera image test (Hikvision, Dahua, Honeywell, Samsung etc).

Applications:
—Find out the other end of the cable in security maintenance and network engineering
—CCTV system installation and maintenance
—Dome camera and All in one camera testing
—The CCTV transmitting channel testing
—PTZ controller

Features of the CCTV Security Camera Tester:
—3.5 inch full-view TFT-LCD, 480(RGB)x320
—low consumption, work for 11 hours
—OSD menu, English, Chinese and other languages optional
—LCD screen brightness/contrast/color Saturation adjustable
—Cable scan, send the specific signal, easy to find the connected cable.
—Digital multimeter, voltage, current, resistance and capacitance can be tested, continuity testing, diode testing.
—Automatically identify and adapt the video mode of NTSC and PAL
—Enhanced colorbar generator, by receiving the video color bar to test the video channel whether transmit normally
—Moveable Micro SD(4GB micro SD included)
—LED Lamp, easy to operate at night
—User-defined shortcut keys(F1 and F2)
—10x zoom,video image can be magnified to view the details, easy to use
—Snapshot and save the current image as JPG file in the SD card
—PING testing,test IP camera or other network devices’ ethernet port whether work normally, and the IP address whether is right
—IP address scan, quickly search the IP address for the connected IP camera and other network devices
—POE voltage measurement, test the POE switch’s voltage to IP cameras, wireless AP device and other PD devices
—Device Port flicker, easy to find the connected POE switch port by sending special signals, the connected POE port will flicker at special frequency
—Link monitor; check the setting IP address whether occupied
—PTZ address scan, search up the ID of PTZ camera.
—Network cable and Telephone cable testing, display the sequence of connection and the No of the LAN cable
—Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D, SAMSUNG
— Support RS232/RS485/RS422, rate 600 ~ 115200bps adjustable
—Lithium Ion Polymer Battery. The device employs advanced power control and protection circuit
—Display the data and image in on the screen at the same time
—Easy for use that the train is almost unnecessary

Function of the CCTV Security Camera Tester:
1. Video signal testing
The new cctv tester, built-in high definition 3.5”LCD-TFT 480(RGB)x320
full-view display screen, easy and directly displays the camera image quality
Support PAL/NTSC
LCD screen brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work
2. Video signal level test
Test video signal strength attenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image.
It also can real-display the video level value, if out of range, notices will be display in the screen.
3. PTZ controller
Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.
4. Enhanced Color bar generator
Video Generating, the PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful imagines). By receiving the video color bar to test the video channel whether transmit normally. And judge whether the color is different, because of the transmission loss or interference, it suitable for Video transmission of the field tests, such as optical video transmitter and receiver, video cable etc.
The new function color bar can test the image whether shift.
The color bar (red, green, blue, white, black) test the monitor whether have white or black dot etc.
5. DC12V 1A output power
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.
6. Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
7. Cable tester 
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.
8. PTZ controller
Search the Control protocol code from Multifunction keyboard or DVR by RS485 /RS232 interface, test the PTZ control command data whether received anomaly and RS485/RS232 data transmission.
Screen displays 16 hexadecimal codes such as
PELCO-P:A0 00(Add) xx xxxxxx AF xx
PELCO-D:FF 01(Add)xx xxxxxxxx
9. PTZ address scanning
Search up the ID of PTZ camera. Help the engineer search the speed dome address quickly.
10. Image magnification(10xZoom)
Set image 10x zoom, can view and display the details by 1x?2x?3x?4x?5x?6x - 10X zoom in the monitor and tester.
11. Video snapshot
Capture the video image and save the current video frames as JPEG file
12. Video record
Record and save the current video in the SD card
13. Video playback
Video image and record files are saved in the SD card. Storage file directory can be created according to the date
14. Port flicker
The tester will send special signals to make the connected POE port flicker at special frequency, which will enable the installers to easily and quickly find the connected ethernet cable. This function can prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network connection.
15. IP address scan
In digital IP surveillance applications, if IP camera’s IP address is not clear or forgotten; the device cannot be used .
IP address scan can quickly search the connected IP camera or other network device’s IP address.
16. Link monitor
To add an IP camera or other network device to the current network group, the new IP address must not be occupied, otherwise it will cause IP conflicts and stop the equipment normal working. Link monitor can check if the new setting IP address is occupied.
17. PING test
PING is the most conventional network debugging tools; It is used for testing if the connected IP camera or other network equipment’s ethernet port is working normally and the IP address is correct.
18. POE tester
It can test the PoE voltage when the POE switch is supplying the POE power to IP camera. It can clearly display the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers.
19. LED lamp
It is useful for the Engineer to install and maintain security system at night. LED On/Off pressing button, easy operation.
20. F1?F2 User-defined shortcut keys
The user-defined shortcut key is designed for improving the efficiency for the engineer, anytime press, easy to operate.
22. Cable scan
Send the specific signal, easy to find the connected cable.
23. Digital multimeter
Voltage, current, resistance and capacitance can be tested, continuity testing, diode testing.

Technical specifications:

Model		CCTV Security Camera Tester CT2603 (6th generation)
Video Test
Signal mode		NTSC/PAL (Auto adapt)
Display		3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
LCD adjustment		Brightness, Contrast, Saturation adjustable
Video IN/OUT		1 channel BNC Input & 1 channel Output
Video Output Mode		1.0 Vp-p
Video Level test
Level test		Video signals measured in IRE or mV
PTZ controller
Communication		Support RS232 and RS485
PTZ Protocol		Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate		600, 1200, 2400, 4800, 9600, 19200, 57600, 115200bps
Video Signal Generation
Color bar generator		Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP CABLE TEST
UTP cable test		Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output
DC12V power output		Output DC12V1A power for camera
Audio input test
Audio input test		test the pickup and other audio equipments on the front-end
RS485 data analysis
Data Monitor		Captures and analyzes the command data from controlling device
10 x zoom of image
Image 10x zoom		10x zoom image display and video out
Photograph,Video record, Record playback
Photograph		snapshot and save the current image as JPG file
Video record		Video record and storage the file
Record playback		To view the storage file in the SD card
Port flicker
Port flicker		Find the connected POE port quickly.
IP scan, Link monitor, PING test
IP scan		Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor		Check the IP address whether is occupied
PING testing		Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
Cable scan
Cable scan	Search the cable by the audio signal
Digital Multimeter
AC/DC Voltage	0-660V auto/manual range, the min resolution is 0.1mV
AC/DC current	660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
Resistance	660.0O, 6.600kO, 66.00kO, 660.0kO, 6.600MO, 66.00MO
Capacitance	6.6nf~66000uF, the min resolution is 1pf
Diode	0~2V forward voltage, the min resolution is 1mV
Data hold	Hold the measurement optical power value
Relative measurement	display the difference value of the first testing result
Continuity testing		Built-in buzzer will sound, if resistance is lower    than 50 O
Testing speed		3 times/ seconds
Data range	-6600~+6600
POE tester
POE tester		Display the power supply voltage and cable connection states
POWER
Power Adapter	DC 5V(1.5A)
Battery	Built-in 3.7V Lithium polymer battery ,3000mAh
Rechargeable	After charging 3-4 hour, working time lasts 11 hours
Low Consumption	Energy saving technology, the battery icon real-time display
Parameter
Operation setting	English/Chinese and other languages OSD menu
Auto off	5-60 (mins)
Keytone	On/Off
General
Working Temperature	-10?---+50?
Working Humidity	30%-90%
Dimension /Weight	194mm x 112mm x 48mm / 540g