3.5" 12V 1A TFT-LCD CCTV AHD Tester (CT2800AHD)

Product Detail

3.5" 12V 1A TFT-LCD CCTV AHD Tester (CT2800AHD)

 

Description:

3.5” HVGA TFT-LCD screen display/480(RGB)*320 resolution/AHD coaxial test/PTZ control/Color bar generator/ 12V 1A power output.

The new AHD coaxial tester is developed for the On-Site installation and maintenance of coaxial camera, it also combine other functions analog camera test, analog signal output, port finder, UTP test, digital multimeter, optical power meter and TDR cable tester etc. Its portability, user-friendly design and many other functions make the tester an essential tool for all installers or technicians.

 

Applications:

1?CCTV system installation and maintenance
2?Network cabling project installation and maintenance

3?Dome camera AHD camera testing  

4?Video transmission channel testing

5?PTZ controller

 

Features:

1) 3.5 inch screen display, 480(RGB)x320 resolution

2) Low power consumption, working time lasts 11 hours

3) LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust

4) AHD coaxial camera image display, coaxial PTZ control and call up the camera OSD menu 

5) Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images).

6) LED Flashlight.

7) HD coaxial control, PTZ control, color bar generator shortcut key.

8) F1, F2 user-defined key

9) Visual fault locator, to test fiber’s bending and breakage * (Optional)

10) Digital Multi-meter, DC and AC voltage measurement, Resistance measurement Continuity test, Diode measurements, Capacitance measurement * (Optional)

11) Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the connected cable from messy cables. * (Optional)

12) Port Finder,it will enable the installer to easily and quickly find the connected port for an Ethernet cable.

13) TDR cable test, TDR break-point and short-circuit measurement. * (Optional)

14) PTZ control and PTZ protocol analysis
15) Cable test, Test LAN cable or telephone cable, UTP cable etc, cable type and the sequence of wires will be displayed

16) Support more than 30 protocols, such as Pelco-D, Pelco-P, SAMSUNG.

17) Support RS232/RS485,rate 600 ~ 115200bps adjustable

18) Built in Lithium Ion Polymer Battery(3.7V DC 3000mAh )

19) Image display and data control integration

20) Handheld HD coaxial tester, easy to carry and operation.

21) Optical power meter, test fiber loss and value * (Optional)

 

Technical specifications:

Model	CT2800AHD?*?models are Optional
Video Test
Signal mode	NTSC/PAL (Auto adapt)
Display	3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
LCD adjustment	Brightness, Contrast, Saturation adjustable
Video IN/OUT	1 channel BNC Input & 1 channel Output
Video Output Mode	1.0 Vp-p
Video Level test
Level test	Video signals measured in IRE or mV (Only for IP Analog and HDSDI)
Video level meter (Optional)
Video Level meter	PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement
PTZ controller
Communication	Support RS232 and RS485
PTZ Protocol	Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate	600,1200,2400,4800,9600,19200,57600,115200bps
Video signal generation
Color bar generator	Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP cable tester
UTP cable test	Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output
DC12V power output	Output DC12V1A power for camera
Audio input test
Audio input test	test the pickup and other audio equipments on the front-end
RS485 data analysis
Data Monitor	Captures and analyzes the command data from controlling device
CVI test*
CVI video signal test	1 channel CVI in(BNC interface)support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
TVI test*
TVI video signal test	1 channel TVI in(BNC interface) support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
AHD test
AHD video signal test	1 channel AHD in (BNC interface)support AHD 2.0 version, 720p 25/30fps,1080p 25/30fps,camera OSD menu control over coaxial cable
HD SDI test*
HD SDI test	HD SDI Video display and test
Cable scan (Optional) *
Cable scan	Search the cable by the audio signal
Digital Multimeter (Optional) *
AC/DC Voltage	0-660V auto/manual range, the min resolution is 0.1mV
AC/DC current	660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
Resistance	660.0O, 6.600kO, 66.00kO, 660.0kO, 6.600MO, 66.00MO
Capacitance	6.6nf~66000uF, the min resolution is 1pf
Diode	0~2V forward voltage, the min resolution is 1mV
Data hold	Hold and display the measured value
Relative measurement	Display the relative power value
Continuity testing	Built-in buzzer will sound, if resistance is lower than 50 O
Testing speed	3 times/ seconds
Data range	-6600~+6600
Optical power meter (Optional) *
Calibrated Wavelength(nm)	850/1300/1310/1490/1550/1625nm
Power range(dBm)	-70~+10dBm
Sensitivity(nW)	0.001nW
Connector type	FC/PC
Data hold	Hold and display the measured value
Relative measurement	Display the relative power value
Visual fault locator (Optional) *
Visual fault locator	Test fiber’s bending and breakage ( SM and MM fiber)
TDR Tester (Optional) *
TDR Tester	breakpoint and short circuit measurement(BNC cable, telephone cable)
POWER
Power Adapter	DC 5V(1.5A)
Battery	Built-in 3.7V Lithium polymer battery ,3000mAh
Rechargeable	After charging 3-4 hour, working time lasts 11 hours
Low Consumption	Energy saving technology, the battery icon real-time display
Parameter
Operation setting	English/Chinese and other languages OSD menu
Auto off	5-60 (mins)
Keytone	On/Off
General
Working Temperature	-10? ~+50?
Working Humidity	30%~ 90%
Dimension/Weight	194mm x 112mm x 48mm / 540g